Mon-Fri 7.30-4.00 pm     &     Sat 8.30-12.00 pm     |    Phone: 07 3277 6848    |    Email:

Finishing of wood requires careful planning to ensure that the finished piece looks attractive.

Timber Coatings

We are masters in external coatings for all timber products.

The coating and finishing of our External and Internal Timber products

The two major factors which affect the performance of the finish, and subsequently that of the timber, are moisture and sunlight. Any design features which minimise possible moisture ingress to the substrate or exposure to high angle incident sunlight will be beneficial. Timber is essentially a variable substrate, even within a single species. The density, moisture content, absorbency, flexibility and the nature of its extractives may vary considerably. Some timbers are also more susceptible to dimensional change due to moisture or humidity variations. The finishing system must be sufficiently flexible to cater for this movement.

Intergrain UltraDeck

Intergrain Reviva

Timber Cleaner / Restorer

Intergrain Reviva is an impressive high strength cleaner. Its formula is combined with oxalic acid and citric acid, which are both naturally occurring substances. The formula is completed with bio-degradable organic acids.  This product is ideal for cleaning timber prior to coating it with decking oil.

  • Coverage: m2/L: 10
  • Fully cured: N/A
  • Clean up: Water
  • Sheen: None

Intergrain PowerPrep

Sikkens Cetol Deck

Oil Based Decking Oil

The Cetol Deck product from Sikkens is a made for exterior timber decks and handrails. Its transparent coating repels water and defends against harsh weather. Perfect for timber decks and high traffic walking areas and handrails.

  • Microporous allowing the timber to breathe while repelling unwanted moisture
  • Wood grain remains visible after application
  • UV and weather resistant
  • Oil based
  • Satin finish
  • 4 and 20 Litre Cans

Sikkens Cetol Deck Slip Resistant

Slip Resistance Deck Coating

This product enriches the natural beauty of wood while offering outstanding outdoor protection and slip-resistance. Ideal for exterior timber decks, ramps, stairs and walk ways.

  • Water repellent
  • Slip resistant
  • Textured, yet transparent coating
  • This product comes in 1 ready mixed shade. 4 and 20 Litre cans available
  • Natural (078)

Sikkens Cetol HLSe

Oil Based Timber Coating

Can be used as a base coat or a standalone three coat system for the appearance and protection of timber decking, posts beams and all structural timbers exposed to the external weathering including outdoor furniture.

  • Microporous elements which allow the timber to breathe while deterring unwanted moisture
  • UV/ harsh weather resistant
  • repels peeling, mould, and blistering
  • Can be used internally
  • available in 4 Litre cans and 20 Litre Cans(Special order)

Sikkens Cetol Filter 7 plus

Oil Based Top Coat

Cetol Filter 7 Plus is intended for exterior softwoods and hardwoods substrates such as cladding. Designed as the final coatings over a base coats for windows, door frames, pergolas, fences, posts, garage or entry doors.

  • Flexible coating
  • Satin finish – wood grain maintains natural appearance after coating
  • Resistant to UV rays and harsh weather
  • Oil based
  • 4 and 20 Litre Cans (Special order)

Internal Coating for Timber Products

Cabots Cabothane Water  Based Varnish

Cabot’s Cabothane Clear water  Based is a clear polyurethane for bench tops,doors, windows, trim and furniture. It is a durable, hard wearing varnish that enhances timber grain

  • Sizes:- 500 ML
  • Clean Up – Water
  • Coverage – 16m2/Lt

Fillers &  Adhesives

For the filling of cracks,splits,insect or bolt holes,we carry a range of Epoxy fillers to repair your Timber Slab yourself to get a professional finish when ready to coat or polish.Just ask our team for advice on what product is recommended for your special piece of mother nature.


Epox-E-Glue is specially formulated for joining timber and other things with a high strength fully water proof bond. Epox-E-Glue is a thixotropic epoxy glue paste which can bridge gaps with a full strength material. EpoxEGlue is a 1 part epoxy resin to 1 part hardener mix which are mixed together to produce a paste which is put onto one side of the joint. The joint is then assembled, and held together (but not tightly clamped, as that can squeeze all the Epox-E-Glue out of the joint). Overnight, the Epox-E-Glue will harden into a strong glassy whiteish material which grips tenaciously to the two sides of the joint. The bond is stronger than most timbers, and epoxy glue can be used to bond most materials to most materials. (But not some plastics, and some other plastics and metals require special preparation). Epox-E-Glue is especially good at adhering to concrete and masonry.

Epox-E-Glue is formulated to be tolerant of small inaccuracies in the amount of part A and part B. Estimating the amounts carefully by eye is sufficiently accurate. EpoxEGlue can also be used to fill gaps, set bolts into holes drilled in concrete and a million other attaching, gluing and fixing jobs.

Also used for Filling cracks and Natural feature in Timber boards and Slabs

200 Gram or 600gram Kits available

Epoxy Pigment Paste 100 grams

Bright primary colours to colour your epoxy. Just a little goes a long way, we suggest 1% as a starting point. Available in Black,great for filling cracks in all of our Timber Slabs as when mixed with Epox-E-Glue,looks like natural feature in the Timber.

Glass Coat Epoxy Resin – 2 Part System

Epoxy resin is a clear 2-part, pour-on or brush-on, coating which is fairly thick compared to clear polyurethane or other clear finishes.

Resin component, used in conjunction with Glasscoat Premium Timber Finish Part B – Hardener to form an epoxy resin system that provides a tough, durable and high gloss coating used for coating wood, veneer, metal, stone, painted surfaces, table tops and many other surfaces to give a rich super gloss look and protect from scratching and and air humidity with no Odour .Also used for filling large Knots or holes in Timber boards and Rustic Slabs.

Available in:

  • 2 x 250 ML Kit
  • 2 X 500 ML Kit
  • 2 x 1000 ML Kit

    Got a General Enquiry?

    If you have questions or are looking for something specific please submit your enquiry below.